ZWO Off-Axis Guider
    search
    • ZWO Off-Axis Guider
    • ZWO Off-Axis Guider
    • ZWO Off-Axis Guider

    ZWO Off-Axis Guider

    94.00
    Tax included
    Available payment methods
    i
    PayPal
    Secure payment. Additional fees may apply.
    PayPal
    i
    Bank transfer
    Pay comfortably from home. After confirming your order, you will receive all the information required to make a bank transfer.
    Bank transfer
    i
    Pay in store
    Pay directly in our shop in Givisiez, in cash or by card. Your order can be collected after confirmation.
    Pay in store
    i
    PimPay
    A payment system with no fees. Simply top up your PimPay account before completing your purchase. No fees are charged to either the buyer or the merchant.
    PimPay
    i
    HeyLight
    Credit for up to 12 months or payment in 3 instalments. For payment in 3 instalments, the displayed price includes a 3.74% surcharge applied by Astromanie to cover the service fees associated with this payment method.
    HeyLight
    Delivery times depending on the shipping method: Switzerland: 2 to 3 days; Europe: 7 to 10 days.

    ZWO Off-Axis Guider

    Quantity
    Available.

    Available.

    FEATURES

    • Lightweight and only 16.5mm thick!
    • Large prism - 8x8mm
    • Guide through your main imaging scope - no guide scope required!
    • Multiple adapters available including T2, M42 and M48 making it easy to fit to most cameras and telescopes
    • Fully compatible with all ZWO ASI cameras
    • Good stability - strong, stiff connection to the telescope

    Adapters Included

    Setup Guide

    1. Calculate the correct distance for your imaging train. For example, you need to attach a 21mm extension to the ASI071 to reach 55mm back focus (17.5mm + 21mm + 16.5mm = 55mm).

    2. Take off the guider prism part from the OAG and attach the OAG body to the telescope.

    3. Insert the prism back into the OAG body.

    4. Mount the guide camera.

    5. Screw the T2 or M48 adapter on the imaging camera according to your cameras mounting type.

    6. Mount the camera on to the OAG in the correct position and lock the 3 screws.

    7. The final setup.

    8. Check that the prism does not block the imaging area.

    9. Use the guiding screw to adjust the guiding cameras focus. This is best done during daytime to make sure both the imaging and guiding cameras can focus at the same position.

    ZWO Off-Axis

    Specific References

    UPC
    071383122166