No products
Prices are tax included
List of products by supplier: Baader Planetarium
-
10Micron 4″ MAXIDUAL Double Mounting Plate...
10Micron 4″ MAXIDUAL Double Mounting Plate with Clamp Adjustable dual mounting plate for parallel installation of two telescope tubes. Includes 4″ Maxi clamp base and two 3″ Losmandy-compatible clamps (#1452085). Fits GM 2000/3000/4000 mounts (adapters required for GM 3000/4000).
944.00 CHFIn Stock -
Baader Short Pillar Flange Set IV with...
Baader Short Pillar Flange Set IV with Universal Flange 190 mm steel short pillar with universal flange for EQ mounts. Mounts on concrete piers or compatible tripods. Fits many Baader mounting adapters.
440.00 CHFIn Stock -
Baader Medium Pillar (BMP), modal steel...
Baader Medium Pillar (BMP), modal steel pillar with up to 250 kg payload capacity Welded steel pillar with active vibration damping and 250 kg load capacity. For Baader observatory projects only. Specify desired height when ordering.
1'614.00 CHFIn Stock -
Baader Heavy Pillar (BHP) Levelling...
Baader Heavy Pillar (BHP) Levelling Support for GM 3000, 15 cm height (2451186H) For precise polar alignment of GM 3000 mounts on Baader conical steel BHP pillars
394.00 CHFIn Stock -
Baader Levelling Support GM 4000 / L-350,...
Baader Levelling Support GM 4000 / L-350, 15 cm (2451185H) Precision adjustment for GM 4000 and L-350 mounts on BHP pillar
394.00 CHFIn Stock -
Astro-Physics GTO-CP4 Control Box
Astro-Physics GTO-CP4 Control Box Control box for all GTO mounts since 1998. Features Ethernet/Wi-Fi connectivity, support for absolute encoders, fast firmware updates, and secure movement logic.
1'590.00 CHFIn Stock -
Baader levelling support for Planewave...
Baader levelling support for Planewave mount L500 L600 Steel support 10 cm high designed to correct base irregularities and alignment issues under Planewave L Mount 500 and 600. Installs directly on Baader Heavy Pillar BHP piers
489.00 CHFIn Stock -
Baader levelling support for 10Micron GM...
Baader levelling support for 10Micron GM 1000 mount Steel support 106 mm high for levelling adjustments beneath the 10Micron GM 1000 German equatorial mount. Installs directly on Baader Medium Pillar BMP
370.00 CHFIn Stock -
Baader levelling support for mounts GM...
Baader levelling support for mounts GM 2000 and AP 1100 900 Steel support 108 mm high for levelling adjustments beneath 10Micron GM 2000 and Astro Physics AP 1100 or AP 900 mounts. Installs directly on Baader Medium Pillar BMP
389.00 CHFIn Stock -
Baader Steeldrive II Motor Focuser with...
Baader Steeldrive II Motor Focuser with Controller High-precision motorized focusing unit with temperature compensation, designed to move loads up to 8 kg. Compatible with all Baader Steeltrack focusers (classic and Diamond), belt-driven for backlash-free performance. Supplied with hand controller, USB connectivity and thermal sensor.
605.00 CHFIn Stock -
Baader Diamond Steeltrack 2" BDS-SC...
Baader Diamond Steeltrack 2" BDS-SC Focuser for Schmidt-Cassegrain Engineered for Schmidt-Cassegrain telescopes, the Baader BDS-SC focuser ensures unparalleled focus precision through its micro-geared diamond drive. Smooth operation and rigid construction allow secure positioning even under heavy loads.
340.00 CHFIn Stock -
Baader Safety CoolCeramic Herschel Prism...
Baader Safety CoolCeramic Herschel Prism 2" Photographic High-performance 2" Herschel wedge for refractors with integrated ceramic light trap, ClickLock clamp, Continuum filter and four neutral density filters. Designed for safe and precise white-light solar imaging.
575.00 CHFIn Stock -
Hyperion / Morpheus® Eyepiece case
Hyperion / Morpheus® Eyepiece case Eyepiece case with pre-punched compartments for up to eight eyepieces Suitable for Morpheus and Hyperion eyepieces Eyepieces NOT included
89.00 CHFIn Stock -
Baader Hyperion 68° Eyepiece Set (Starter)...
Baader Hyperion 68° Eyepiece Set (Starter) – 4 eyepieces Set of four Baader Hyperion eyepieces (5, 10, 17 and 24 mm) with 68° wide field, designed to extract the full performance from modern telescopes.
589.00 CHFIn Stock -
Baader T-2 Tilter
Baader T-2 Tilter Baader T-2 tilt corrector adjusts camera angle up to 1°, optical length only 9.50 – 10.25 mm, fully compatible with the Baader T-2 system.
169.00 CHFIn Stock -
Baader M48 Tilter
Baader M48 Tilter Baader M48 tilt corrector, continuous 0 to 1° adjustment, optical length 9.50 to 10.25 mm, fully compatible with Baader’s M48 system.
179.00 CHFIn Stock -
Baader M54 Tilter
Baader M54 Tilter Baader M54 tilter corrects up to one degree of sensor tilt while adding only 9.50 to 10.25 mm of back focus. Fully threaded M54 x 0.75 on both sides for plug-and-play use in any M54 imaging train.
196.00 CHFIn Stock -
Baader Flatfield Box 450
Baader Flatfield Box 450 WRGB flat-field panel with a 450 mm clear aperture, provides perfectly even illumination, full Web control, supports telescopes up to 16" on fixed piers or 14" in rotating domes.
1'954.00 CHFIn Stock -
Baader Flatfield Box 650
Baader Flatfield Box 650 50 mm WRGB flat-field panel, perfectly even illumination, web-controlled brightness, supports telescopes up to 24" fixed or 22" in slit domes.
2'589.00 CHFIn Stock -
BAADER AMICI PRISM DIAGONAL 45° VIEWING...
BAADER AMICI PRISM DIAGONAL 45° VIEWING ANGLE 24 mm – 1.25" BARREL Baader 45° erecting prism diagonal with 24 mm aperture and 1.25" barrel, delivers upright and left-right correct images, ideal for terrestrial use.
79.00 CHFIn Stock -
Baader Flatfield Box 850
Baader Flatfield Box 850 WRGB flat-field panel, 850 mm clear aperture, browser-based control, delivers uniform flats for telescopes up to 32" fixed or 30" in rotating domes.
3'409.00 CHFIn Stock -
Baader Flatfield Box 1250
Baader Flatfield Box 1250 WRGB flat-field panel, 1250 mm clear aperture, browser-controlled brightness, delivers uniform flats for telescopes up to 1200 mm (48") fixed or 1150 mm (46") in rotating domes.
5'400.00 CHFIn Stock -
Baader Counterweight Kit for Balancing...
Baader Counterweight Kit for Balancing Planewave Optical Tubes Stainless steel counterweight system designed for precise balancing of Planewave OTAs on direct-drive mounts.
285.00 CHFIn Stock -
Baader FCCT 2" Filter Holders
Baader FCCT 2" Filter Holders Set of four 3D-printed holders for unmounted 2" (Ø 47.4 mm) Baader filters. Neodymium magnetic lock, safe swap with FCCT extractor tool. Net weight : 0.04 kg.
125.00 CHFIn Stock
