QHY 16200A MONOCHROME CAMERA/7 position filters weel

QHY 16200 CCD

New product

QHY 16200A MONOCHROME CAMERA/7 position filters weel

More details

Article not in stock. Contact us in advance for the order (info@astromanie.ch)

6'035.3 CHF

More info

QHY 16200A MONOCHROME CAMERA/7 position filters weel

This is a cutting edge new CCD Camera that was designed by QHY with amateur astronomers who need larger CCD sensors in mind. Its sensor is a new and unique creation with a significantly larger surface area compared to previous QHY sensors, and provides splendid quality full frame monochrome imaging. The format is called APS-H by QHY, and it's a 16 Megapixel Sensor with a 27mm*21.6mm surface area. This is a particularly large monochrome sensor, and is ideal for use with various filters to capture the most beautiful kinds of astronomical images. It is fully expected to possess a similar or higher Quantum Efficiency than QHY's 8300.

The QHY KF16200 is a part of QHY's new "A" series, or "All in One" series. It includes a built-in motor driven filter wheel and it natively supports the QHYOAG, which it is bundled with. The OAG can be installed on the camera solidly with six screws at minimum back focus, precious for some optical systems. The filter wheel that is integrated into the QHY KF16200 is a five position 2" filter wheel. And this fine filter wheel and Off Axis Guider are not the only things worth boasting about when it comes to this Camera! An internal USBHUB(2.0) provides two USB host ports and a USB to dual RS232 converter. A guiding camera, mount, and electric focuser could all be connected directly to this Camera instead of the computer to reduce cable clutter and chance of signal loss due to the long cables. Also built into the Camera is a two stage TEC cooling system that works quite well, enabling cooling up to forty degrees below the ambient temperature.

The QHY 16200 makes use of a special mechanical shutter in the shape of a butterfly, which is driven directly by the motor all in one piece, with absolutely no friction with other parts of the Camera. This is conducive towards a long working life for the shutter without major issues arising. This splendid shutter has two sides to cover the light; one for opening the shutter and the other for closing it. Its illumination is uniform.

Of note is that the Back Focus is altered by the OAG- the mechanical size and the optic path are not the same thing. The base back focus without the OAG is 33.5mm. The OAG adds a further 13mm of Back focus for a total Back Focus of 46.5mm.

This camera uses 12V current for power, and has a single power socket. The power socket is threaded to connect to DC plugs firmly. There is another socket which is connected to the input in parallel. It can supply a 12V current to another device nearby.

This product is in the beta-testing stage; information is subject to change as Beta Testing results come in from QHY.

Manufacturer Product Number: QHY16200OAG

QHY16200A Specification
CCD Sensor
APS-H 16.2 Megapixel CCD - Standard Grade
Effective Pixels
4540(H) x 3630(V),16.2 Megapixels
Pixel Size
6.0um x 6.0um
Effective Area
27.0mm(H) x 21.6mm(V), APS-H format
Readout Type
Full Frame CCD, Progressive Scan
FullWell
41ke- Typical
ADC
16-bit
Readout Noise
10e- Typical
System Gain
0.7e/ADU
Binning
1x1, 2x2, 4x4
Anti-Blomming
2000X saturation
Thermal Noise
0.04e-/pixel/sec @ -20C
Exposure Time
1ms - 10000 sec
TEC
2-stage
Cooling
-40 below Ambient, Typical
Shutter
Even-illumination butterfly mechanical shutter
Moisture Control
Air Connector for removable silicon gel tube
Heat board for optic window of airproof CCD chamber
Built-in Filter Wheel
5-position 2 inch/50mm, or 7-position 2 inch/50mm
OAG interface
Six M3 scew holes for QHYOAG
Telescope Interface
M54/0.75 inner screw
Power consumption
12VDC
0% cooling 8W     50% cooling 16.5W    100% cooling 27W
Supported Filters
2-inch mounted filters, 5-positions: Maxium 6mm filter   cell thickness (threads of the filter cell not included)
2-inch mounted filters, 7-positions: Maxium 9mm filter cell thickness (threads of the filter cell not included)
50mm unmounted filters, 5-positions: 1-5mm thickness
50mm unmounted filters, 7-positions: 1-8mm thickness
Weight
1550g (standard CFW5 version), no OAG included
2330g (CFW7 version), no OAG included