Pack ZWO ASI1600MM-PRO

CCD ASI 1600 MM-PRO

New product

Product Description

Notice:Cooled cameras need a 12v power adapter, If you don’t have one, please click this link to buy a 12V power adapter. There are 4 different standard for different contury, please choose it carefully.

More details

According to availability at the supplier. Please contact us for more information

2'273.0 CHF tax incl.

More info

  • The ZWO ASI1600MM Pro is a Micro Four Thirds camera packed with features that help you produce world-class astrophotography images.

    ASI1600MM PRO COOLED CAMERA HIGHLIGHTS

    • Exceptional noise reduction technology and video capabilities.
    • The 1600 Pro is ideal for photographing: Nebulae, galaxies, planets, solar images, lunar images, and more.
    • Can run without external power in normal mode- without cooling or filter wheel in use.
    • USB 3.0 Port allows your camera to run at 14.7 fps at base through its 5 GB bandwidth.
    • USB 2.0 Hub provides attachment to various accessories for better cable management.

    EXPERIENCE THE ASI1600MM PRO COOLED FEATURES

    ASI1600 IMAGE QUALITY

    The ZWO ASI1600 has a built-in 12-bit ADC but can provide over 12 stops of dynamic range! Which means it can capture a wider tonal range a KAF-8300 sensor. The Camera inherently has a much lower read noise, at a 0 gain setting and will further decrease the higher the gain.

    It also includes an upgraded PCB board with 256MB DDR3 memory buffer. Slow data transmission can cause amp-glow around your image, so the DDR memory buffer takes care of that for you.

    MOST ADAPTABLE CAMERA BODY

    Most ZWO cooled cameras have a short back focus, making them very adaptable to almost any telescope system. The ZWO ASI 1600 has a back focus of 6.5 mm! Check the ZWO Pro Back Focus Chart for the best configurations.

    TWO-STAGE COOLING SYSTEM

    The ZWO ASI1600 is capable of pushing at a maximum of 40 to 45 degrees below the ambient temperature. The camera itself operates optimally within the temperature range of minus 5 degrees Celsius to minus 45 degrees Celsius and is best stored within the temperature range of minus 20 degrees Celsius to minus 60 degrees Celsius.

    This powerful cooling system complements the naturally low read noise of the camera to further refine the quality of images produced- aiding ZWO to continue to provide CCD quality at CMOS prices. And that's just one example of how each individual part of this top-notch astronomy camera comes together to produce a genuinely exemplary whole!

    7 POSITION FILTER WHEEL

    The ZWO EFW7 can hold up to seven 1.25-inch mounted or 36 mm unmounted filters. The 36 mm filters are held in place with included set screws and washers.
    The EFW7 body is CNC machined from aircraft-grade aluminum and is black anodized. It is sturdy and reliable, yet weighs just 14 ounces and is 20 mm thick! Inside, an NPM stepper motor is used to rotate the carousel in any direction. The EFW7 is powered via USB and includes a cable that can be plugged into the USB 2.0 hub of ZWO cooled cameras.

    COMPLETE FILTER SET

    Switch between each filter to gather colorful variations of light resulting in different vivid images! Every ZWO 1600 Kit comes with a set of LRB filters and a complete set of 7-nanometer narrowband filters (Ha, Sii and Oiii). Finely polished down to an optical accuracy of one-fourth wave, the filters provide zero apparent optical distortion from the filters. 

    Manufacturer Product Number: 1600MMP-K3

  • specifications

    ADC 12 bit
    Back Focus 6.5 mm
    Camera Connection M42 x 0.75 mm
    Color or Mono Monochrome
    Cooled Cooled
    Delta T 40C
    Free Shipping Yes
    Full Rez Frame Rate 23fps
    Full Well 20ke
    Max Frame Rate 192.4fps
    Mega Pixels 16.4 mp
    Peak QE 60%
    Pixel Array 4656 x 3520
    Pixel Size 3.8 microns
    Read Noise 3.6e
    Sensor Diagonal 22.2 mm
    Sensor Type CMOS
    Sensor Panasonic MN34230
    Warranty 2 Year Warranty
  • included items

    • ZWO ASI1600MM Pro camera body.
    • Camera bag.
    • T2-1.25-inch adapter.
    • Quick guide.
    • T2 extender (21 mm length).
    • T2-M48 extender (16.5 mm length).
    • M42 x 1.25-inch nosepiece.
    • 1.25-inch cover.
    • M42 to M48 adapter.
    • USB 2.0 short cables (x2).
    • 2 m long USB 3.0 cable.
    • Spacers (x2).

     

    • ZWO 7x36 mm Type2 EFW Body.
    • 1.25-inch Holder - T2.
    • T2 nosepiece.
    • Phillips screwdriver.
    • A bag of M2 screws.
    • T2 to T2 adapter (male).
    • USB 2.0 cable.

     

    • 36 mm RGBL filter set (7 nm).
    • 36 mm narrowband (Ha/Sii/Oiii) filter set (7 nm).
    • Driver and extra software CD (Mac, PC, and Linux compatible).